An electric chainsaw, even though less powerful, has lots of advantages such as its lightweight nature, ease-of-us, quieter, and mobility. If I were you, I would pick an electric-powered chainsaw over gas-powered ones any day.

Just like other chainsaws in the market, sharpening its chains regularly is also a must. The more you use it, the duller it will be especially when maintenance is out of the picture. This is where things get costlier and replacement is the only solution.

Replacing a Chainsaw Chain

  • Whenever you use a chainsaw, it gets stretched and begin to sag on the guide bar. Every time you operate it for longer periods of time, it gets loose and can easily come off the guide bar which is a recipe for disaster when not being tend to.

Is It Really Important to Replace a Chainsaw Chain?

  • In order for a chainsaw to work as it is intended to be, its parts need to be maintained to remain in good condition. With the right maintenance, you will get top-notch performance for your chainsaw without putting too much stress on the machine’s engine.
  • Without maintenance, the chain will become dull and loose over time. This is where accidents like chainsaw kickback is likely to happen. If you don’t know what kickback is, it is an instance where the chainsaw suddenly strikes back to the user upwards toward the head, resulting to a gruesome face split if not wearing any protective gear.

Things to Consider When Replacing a Chainsaw Chain

  • When looking for a chainsaw chain replacement, it’s important to look at its different aspects regarding the chainsaw and also its dimensions as well. This includes:
  • Check if the chain fits on your chainsaw – It’s important to know the right measurement of your chainsaw so that everything fits into place. The easiest way to do this is to read the manual or contacting the chainsaw manufacturer.
  • Check the gauge, pitch, & length of the chainsaw
  • Gauge refers to the thickness of the drive links that is determined on the bar gauge. The drive links are found on the chain and it is the one responsible to know the exact fit on the guide bar. Its use is to measure the thickness of the drive links that’s found on the bottom part of the chain. The gauge measurement of the chain tells how strong the drive links is. The thicker the drive links, the heavier it is. And since weight is our concern, it’s best to opt for lighter ones in order for the saw to operate well.
  • Pitch is the distance between the drive links. The larger the pitch means the heavier the chain. It’s one of the most complicated measurements since it is defined as the distance between three bearings divided by two. In order to get the right chainsaw chain, counting the number of drive links must be done. However, if the user manual of the chainsaw you’re using doesn’t indicate pitch measurement, then it’s best not to do it by yourself and let an expert find a suitable chain replacement for your machine.
  • Length is the number of drive links and length of the full chain loop. For a chainsaw to function safely, it needs to have an appropriate chain length.

Steps-by-Step Guide on Replacing Your Chainsaw Chain

  • Now that you know about chainsaw chains above, it’s time for the replacement part assuming that you have bought a suitable chain for your chainsaw. It may seem overwhelming at first, but replacing a chainsaw chain is easy as pie once you get the hang of it.
  • Before anything else, don’t forget to grab a wrench and a screwdriver. And most of all, patience is key. Now let’s begin!
  • Use a wrench to unscrew the nuts on the chainsaw side plate. Once done, remove the plate to get access to the chain.
  • Push the nose of the chainsaw’s bar towards the chainsaw to release chain tension. You can now easily remove the chain out of the bar after doing so.
  • Use a screwdriver to loosen the tightening screw on the guide bar. The purpose of this is for you to be able to fit the replacement chain easily.
  • Remove the chain from the guide bar. Remove the housing as well that is found around the chain arm.
  • Lastly, carefully thread your brand new chain into the chainsaw’s clutch drum. Ensure that the drive links are connected in the sprocket.

  • And now you’re done! After threading the chain, add tension by pulling the nose of the guide bar away from the chainsaw. Securely tighten the chain by adjusting the screw into a clockwise manner. Now that you’re done with that, reinstall the side case of the device and make sure that everything is properly lubricated before using.

Leave a comment

Your email address will not be published. Required fields are marked *